IndiaMART TrustSeal
Variety Metal Corporation
Send Email
Call Us : 08043051901

Home » Product Range » Stainless Steel Fittings

Stainless Steel Dairy Fittings

The stainless steel dairy fittings are made using graded SS304, SS 316L steel. These fittings are high on tensile strength and durability and ensure hygienic operation. The fittings are designed with flush and crevice-free joints and are suitable for in-place cleaning.

Features
  • Easy to clean
  • Crevice free joints
  • High bend tolerance
  • Resistant against rust
  • Long service life

Available Forms : Bends, Sight glass, Reducers, Tees, Pipe holders, Hose nipples, End caps and Expander. The custom designed components are also available.

Available End connections : SMS, butt-weld, TC Clamp, DIN and flanged.

Available Sizes : 1"(25.4 mm), 2"(50.8 mm), 4"(101.6 mm), 2.5"(63.5 mm), 1.5" (38.1 mm), 3"(76.2 mm).

Available Internal diameter & wall thickness :

1.5mm wall thickness for sizes up to 2".

2mm for 2-1/2"to 4"m, 2.5mm for 6" and 8"

Contact Edge finish :

Fittings: 180 grit or better

Valves: 240 grit or better

Corner

Stainless Steel Compression Fittings

The stainless steel compression fittings are the fittings mainly designed to use in aggressive environments while dealing with corrosive fluids. Suitable to be used with plastic as well as metal tubing, these fittings serves as easiest way to connect one pipe to other.
The fittings are easy to install but need to be replace from time to time as these are failed to create lifetime seal. The fittings must be installed with care and proper fluid tight sealing is ensure.

Features
  • Longer service life
  • Wide range of end connections
  • High heat tolerance
  • High heat tolerance
Applications
  • Process Control
  • Instrumentation Industry
  • Power Plants
  • Fertilizer Industry
  • Automobile Industry
  • Chemical Industry
  • Petrochemical Industry
  • Hydraulic & Pneumatic Utilities

Available Grades :

Stainless Steel : ASTM A182 F304/ 304L/ 304H/ 316/ 316L/ 317/ 317L/ 321/310/ 347/904L etc.

Carbon Steel : ASTM A105 / A694 F42/46/ 52/56/ 60/ 65/70 / A350 LF3/ A350 Lf2.

Alloy Steel : ASTM A182 Fl/ F5/ F9/ F11/ F22/F91 etc.

Available temperature : Below 150

Available Sizes : O.D: 1/16"-2"OD

Thread : NPT & BSPT

Appropriate medium : Oil article, water, air & corrosive media

Nominal pressure : Up to 6000PSI

Nominal Types : Elbows, Equal/Unequal Tees, Concentric/Eccentric Reducers, Full/Half Couplings, Reducing Couplings, Caps, Cross, Unions, Hex/Reducing/Flash Bushings, Plugs, Nipples, Swage Nipples, Concentric/Eccentric Swages, Reducer Inserts, Boss, Laterals, Street Elbows & Outlets/Branch Connections (Weldolets, Thredolets, Sockolets, Flexolets, Latrolets, Elbolets, Sweepolets, Insert Weldolets, nippolets, Brazolets, Coupolets) are manufactured according to ANSI B 16.11, BS 3799, MSS SP-79 & MSS SP-95.


Corner

Home   |   About Us   |   Product Range   |   Quality Control   |   Export Market   |   Contact / Enquiry
Member IndiaMART.com © Variety Metal Corporation, Delhi. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Looking for Product Name ?

x

Send SMS Enquiry

*Please Enter Requirment

*Please Enter valid Mobile Number

*Please Enter Proper Name